157
Transferring images to a computer
11
Disconnecting the camera from your computer
3
Remove the USB cable or IEEE1394 cable from the camera.
4
Remove the USB cable or IEEE1394 cable from your computer.
Note
● Windows Me/2000/XP: When you click [Unplug or Eject Hardware], the window may return
the following message. In such case, make sure that no image data is being downloaded
from the camera, and that there are no applications open that were accessing the camera
image files. Close any such applications and click [Unplug or Eject Hardware] again and
then remove the cable.
To Next Page
Loading...
