126
Customizing the settings/functions of your camera
8
Speed synchronization
You can set the shutter speed that will be used when the built-in flash fires.
The speed can be set from 1/60 to 1/180 in 1/3 EV increments.
1 Menu [ ] [#X-SYNC]
2 Use to select the desired speed.
3 Press the i button.
When you take pictures in
AUTO
, i, & or / mode, the built-in flash will
automatically pop up in low-light or backlit conditions. If you want to control the
flash pop-up, set this function to OFF.
1 Menu [] [AUTO POP UP]
2 Use to select [ON] or [OFF].
3 Press the i button.
Notes
• For details on the synchronization speed of commercially available flashes, refer to
their manuals.
Auto flash popup
s0004_e_Advanced.book Page 126 Tuesday, September 27, 2005 4:15 PM
To Next Page
Loading...
