Olympus EVOLT E-500 - Button Timer; Auto Power off

136
Customizing the settings/functions of your camera
8
Button timer
You can specify the operable time for function settings on the current setting
screen from the time you take your finger away from any operation button.
1 Menu  []  [BUTTON TIMER]
2 Use to set.
[3 SEC] You will have 3 seconds to
complete function setting on the
current setting screen.
[5 SEC] You will have 5 seconds to
complete function setting on the
current setting screen.
[HOLD] You can take as long as you like to complete function setting. The
current screen will remain until you press the button again.
3 Press the i button.
This camera automatically turns off to reduce battery consumption if it is not
operated for 4 hours. When you need to use the camera for a long time, you
can reset this battery-saving function.
1 Menu  []  [4h TIMER]
2 Use to select [OFF] or [4h].
3 Press the i button.
Auto power off
HOL
D
s0004_e_Advanced.book Page 136 Tuesday, September 27, 2005 4:15 PM