134
Customizing the settings/functions of your camera
8
USB mode
You can connect the camera directly to a computer or printer with the provided
USB cable. If you specify the device you are connecting to beforehand, you
can skip the USB connection setting procedure normally required every time
you connect the cable to the camera. For details on how to connect the
camera to either device, refer to Chapter 9 "Printing" (P. 139) and Chapter 10
"Transferring images to a computer" (P. 152).
1 Menu [ ] [USB MODE]
2 Use to set.
[AUTO] The selection screen for the
USB connection will be
displayed every time you
connect the cable to a
computer or printer.
[STORAGE] Allows USB connection to a PC and transfer of data to the
PC. Also, select to use the OLYMPUS master software via PC
connection.
[CONTROL] Allows you to control the camera from a PC using the optional
OLYMPUS Studio.
[< EASY] Can be set when connecting the camera to a PictBridge-
compatible printer. Pictures can be printed directly without
using a PC.
g "Connecting the camera to a printer" (P. 146)
[< CUSTOM] Can be set when connecting the camera to a PictBridge-
compatible printer. You can print out pictures with set number
of prints, print paper and other settings.
g "Connecting the camera to a printer" (P. 146)
s0004_e_Advanced.book Page 134 Tuesday, September 27, 2005 4:15 PM
To Next Page
Loading...
