92
White balance — Adjusting the color tone
6
Exposure, image and color
WB bracketing
Three images with different white balances (adjusted in specified color
directions) are automatically created from one shot. One image has the
specified white balance, while the other two are the same image adjusted in
different color directions. All three images are saved on the card.
1 Menu [] [WB BKT]
2 Use to select the color direction.
R-B Red - Blue
G-M Green - Magenta
• You can set both color directions.
3 Use to set compensation values.
[OFF] / [3F 2STEP] / [3F 4STEP] /
[3F 6STEP]
4 Take the picture.
• When the shutter button is pressed down all
the way, images adjusted in specified color
directions are automatically created.
TIPS
To apply WB bracketing to white balance you have adjusted:
J Adjust white balance manually, then use the WB bracketing feature. WB
bracketing is applied to your white balance adjustment.
Notes
• During WB bracketing, the camera cannot shoot in sequence if there is not enough
memory in the camera and card for storing more than the selected number of
frames.
s0004_e_Advanced.book Page 92 Tuesday, September 27, 2005 4:15 PM
To Next Page
Loading...
