21
Control panel screen and function settings
1
Basic operations
Setting using direct buttons
1 Press the button for the function you want to set (direct button).
• The direct menu is displayed.
Ex.) When setting white balance
2 Use the control dial to set.
• If you do not operate the control dial within a few seconds ("Button timer" g
P. 136), the control panel screen will be restored and your setting will be
confirmed. Your setting can also be confirmed by pressing the i button.
List of direct buttons
Direct buttons Function Ref. Page
1 WB (White balance) button Sets white balance P. 85
2 AF (Focus mode) button Sets focus mode P. 70
3 ISO button Sets ISO sensitivity P. 82
4
(AF frame selection) button
Selects AF frame P. 69
5
(Metering) button
Sets metering mode P. 77
6
</Y/j (Remote control/
Selftimer/Drive) button
Sets Remote control /
Selftimer / Drive
P. 62, P. 63
P. 6 5
7
F (Exposure compensation)
button
Sets exposure
compensation value
P. 7 9
8 # (Flash) switch Sets flash mode P. 53
Direct menu
2
1
s0004_e_Advanced.book Page 21 Tuesday, September 27, 2005 4:15 PM
To Next Page
Loading...
