59
Flash shooting
4
Various shooting functions
5 Select the flash control mode.
• TTL-AUTO is recommended for normal use.
6 Press the shutter button halfway.
• Shooting information such as ISO sensitivity,
aperture value, and shutter speed is
communicated between the camera and
flash.
• # lights up in the viewfinder.
7 Press the shutter button all the way.
Notes
• When shooting with the flash control mode set to TTL-AUTO, pre-flashes are emitted
before firing the regular flash.
• When the flash control mode is set to TTL-AUTO, or when shooting a subject at a
distance with ISO set to 400 or higher, flash control accuracy will decrease.
Viewfinder
# lights up:
Charging is
complete.
# blinks:
Flash
charging.
s0004_e_Advanced.book Page 59 Tuesday, September 27, 2005 4:15 PM
To Next Page
Loading...
