3.2 Alarm indicator
39
OER-Elite OPERATION MANUAL
Ch.3
Communication status indicator
This indicator shows the network status of the reprocessor. The network function setting and
connection status can be confirmed depending on the type of indicator. When the
non-connected status is displayed (yellow indicator), the reprocessor is not connected to a
network. Check the power supply to the external devices and the connection between the
external devices and the OER-Elite. If the problem cannot be resolved, contact Olympus.
Tabl e 3.1
Alarm indicator information button
Press the button to view the information about the displayed alarm indicator.
Figure 3.7
• If the network function is disabled, the information screen does not show
information on the network.
• The information screen shows only the explanations of the warnings indicated by
the displayed alarm indicator.
Indicator Description
green Communication is established.
yellow Communication is interrupted.
Not displayed Communication setting is OFF.
When no alarm indicator is displayed When alarm indicators are displayed
To Next Page
Loading...
