Olympus OER-Elite - Page 83

3.7 Checking the MRC level and entering the check result
73
OER-Elite OPERATION MANUAL
Ch.3
NOTE
If the touch screen displays a screen as shown in following figure, perform the LCG
Mixing. If not completed Mix LCG, cannot see the MRC check result. For detailed
on “Mix LCG”, refer to Section 7.4, “Mix LCG”.
Figure 3.49
2 Select the button that corresponds with the result of the MRC check. The button turns
white.
Figure 3.50
Select the result
of the MRC check
using the test
strip.