122
Chapter 6 Reprocessing, Storage, and Disposal
HIGH FLOW INSUFFLATION UNIT UHI-4
Reprocessing the High Flow Insufflation Unit (UHI-4)
and Smoke Evacuation Foot Switch (MAJ-1939)
Reprocessing workflow for the High Flow
Insufflation
This chapter describes the workflow for reprocessing the High Flow
Insufflation and accessories.
1. Confirm the appearance of the high flow insufflation unit and accessories.
2. If patient debris directly or indirectly adheres to this instrument and
accessories, refer to “Disinfection” on page 124. Otherwise, be sure to
follow the next step.
3. If disinfection is necessary according to national, local, or facility standards,
refer to “Disinfection” on page 124. Otherwise, refer to “Cleaning” on
page 125.
Figure 6.2
1. Confirm the appearance of this instrument
2. Patient debris is directly or indirectly adhered to this instrument
3. Disinfection is necessary according to national,
local, or facility standards
No
Disinfection
(→“Disinfection”)
Daily care
(→“Cleaning”)
No
Yes
Yes
To Next Page
Loading...
