Olympus UHI-4 - Page 66

60
Chapter 3 Installation and Connection
HIGH FLOW INSUFFLATION UNIT UHI-4
3. Connect the assembled tube to the CO
2
insufflation connector of this
instrument (see Figure 3.19). Be sure to insert the tube all the way into the
port (see Figure 3.20). When not using the filter, connect the end connected
without the luer lock connector of the insufflation tube directly to this
instrument.
Figure 3.19
Figure 3.20
CO
2
insufflation connector
Filter connecting tube
CO
2
insufflation
connector
Insert the insufflation tube to this retention step.