Omega DP41-B Series - Command Formats

8-4
8. Command and Response Structure
8.2.3 COMMAND FORMATS
For “P” and “W” Command classes:
a) Point-to-point mode: b) Multipoint mode:
* ccc<data>[hh]<CR> *nnccc[<data>][hh]<CR>
For “G” and “R” Command classes:
a) Point-to-point mode: b) Multipoint mode:
*ccc[hh]<CR> *nnccc[hh]<CR>
For “X”, “V”, “U”, “D”, “E”, and “Z” Command classes:
a) Point-to-point mode: b) Multipoint mode:
*ccc[hh]<CR> *nnccc[hh]<CR>
For “Y” Command classes:
Remote Display
a) Point-to-point mode: b) Multipoint mode:
*Y01<data><CR> *nnY01<data
><CR>
Remote Indicator Controller
a) Point-to-point mode: b) Multipoint mode:
*Y02<data><CR> *nnY02<data><CR>