10-22
10. Data Format Commands (P, G, R, W)
10.20 BLOCK D
R/W43, 44, 45, 46, 47, 48 are reserved by factory. It is not recommended that
that the customer perform these commands.
TABLE 10.20 R/W43 (BLOCK D)
*To write default value:
W43000000000000000000008000000000008000800000008000000080000640
BYTE NUMBER DESCRIPTION NUMBER OF DEFAULT
& ORDER BYTE VALUE
1,2 Analog out mA Scale factor 2 0000
3,4 Analog out mA offset factor 2 0000
5,6 Analog out Volt Scale factor 2 0000
7,8 Analog out Volt offset factor 2 0000
9,10 QD-Online 2 0000
11,12 Cal. Current Scale 2 8000
13,14 Cal. Current Offset 2 0000
15,16 (Reserved) 2 0000
17,18 Cal. Bridge 2 8000
19,20 Cal. Ratio Scale 2 8000
21,22 Cal. Ratio Offset 2 0000
23,24 Cal. Quasi Scale 2 8000
25,26 Cal. Quasi Offset 2 0000
27,28 Cal. Howland Pump fine 2 8000
29,30 Cal. Howland Pump 2 0640