10-1
10. Data Format Commands (P, G, R, W)
This section introduces data formats in detail. The following conditions are assumed in
the text and in examples in this section
1. The recognition character is the asterisk(*).
2. The meter address number is 15 HEX (21 decimal)
3.
When “W” command is given, a reset is necessary to initiate the command.
4.
“X” in bit pattern information means the bit is not related to that parameter.
5. Each byte consists of 8 bits.
6. Each byte consists of 2 nibbles; Most Significant Nibble (MSN) and Least
Significant Nibble (LSN)
To Next Page
Loading...
Need help?
General
