8 Pulse Outputs
8-76
CJ2M CPU Unit Pulse I/O Module User’s Manual
5 The number of PCBs in the stocker is counted with counter C0 by counting the number of times
the stocker is raised.
6 When the stocker is full, it is moved (CIO 1.01) and only the conveyor is lowered (absolute posi-
tioning) when stoker movement is completed (CIO 0.03).
7 An immediate stop is executed to stop pulse output with the immediate stop switch input (CIO
0.01).
z PLC Setup
Note The setting of the option to use the origin search is read from the PLC Setup when the power supply is
turned ON.
Preparations
Setting
Enable the origin search setting for pulse output 0.
To Next Page
Loading...
