Omron CP - PROGRAMMING MANUAL 05-2007 - Table Data Processing Instructions

567
Table Data Processing Instructions Section 3-16
3-16 Table Data Processing Instructions
This section describes instructions used to handle table data, stacks, and
other ranges of data.
3-16-1 SET STACK: SSET(630)
Purpose Defines a stack of the specified length beginning at the specified word.
Ladder Symbol
3.4580>1.4876
−3.4580E+48<1.4876E+48
1000101101000100
1110011101101100
1010100111111011
0100000000001011
15 0
S1 :D100
S1+1:D101
S1+2:D102
S1+3:D103
0111100100111110
1010100001011000
1100110100110101
0011111111110111
15
0
S1 :D200
S2+1:D201
S2+2:D202
S2+3:D203
1101111010010001
1010100110110110
1110110110110000
1100101000000010
15 0
S1 :D100
S1+1:D101
S1+2:D102
S1+3:D103
0101010001010011
1010100000101011
0100100100100100
0100100111110000
15
0
S1 :D200
S2+1:D201
S2+2:D202
S2+3:D203
DOUBLE FLOATING LESS THAN Comparison (<D)
Decimal value: 3.4580
Decimal value: −1.4876
Does not yield an ON condition.
Decimal value: −3.4580E+48
Decimal value: 1.4876E+48
Yields an ON condition.
Instruction Mnemonic Function code Page
SET STACK SSET 630 567
PUSH ONTO STACK PUSH 632 570
FIRST IN FIRST OUT FIFO 633 573
LAST IN FIRST OUT LIFO 634 575
DIMENSION RECORD TABLE DIM 631 578
SET RECORD LOCATION SETR 635 580
GET RECORD NUMBER GETR 636 582
DATA SEARCH SRCH 181 584
SWAP BYTES SWAP 637 586
FIND MAXIMUM MAX 182 588
FIND MINIMUM MIN 183 591
SUM SUM 184 594
FRAME CHECKSUM FCS 180 597
STACK NUMBER OUTPUT SNUM 638 600
STACK DATA READ SREAD 639 603
STACK DATA OVERWRITE SWRIT 640 606
STACK DATA INSERT SINS 641 609
STACK DATA DELETE SDEL 642 612
SSET(630)
TB
N
TB: First stack address
N: Number of words