Omron CP - PROGRAMMING MANUAL 05-2007 - Page 794

761
Step Instructions Section 3-21
Parallel Control
W0.00
W0.01
W0.02
W0.03
W0.04
Step (A)
Step (B)
Step (C)
End
0.05 (Step (C) reset conditions)
Step (D)
Step (E)
0.04 (When both Step (B) and Step (D)
are complete, moves to Step (E)
0.03 (Step (C)
→ Step (D)
transition condition)
0.01 (Step (A), (C) simultaneous starting condition)
0.02 (Step (A)
→
Step (B) transition
condition)