Omron E5GN - Page 104

E5GN
5–37
Communications unit
No.
Baud rate
Communications data
length
Communications stop
bit
Communications parity
Communications function must be sup-
ported.
Ă• Each parameter is enabled when the power is reset.
Ă• Match the communications specifications of the E5GN and the host computer. If a 1
: N connection is being used, ensure that the communications specifications for all
devices in the system (except Communications unit No.") are the same.
Parameter
Displayed
Characters
Set Value Setting Range
Communications
unit No.
0, 1 to 99
0 to 99
Baud rate
1.2 / 2.4 / 4.8 / 9.6 / 19.2 (kbps)
1.2 / 2.4 / 4.8 /
9.6 / 19.2 (kbps)
Communications
data length
7 / 8 (bit)
7 / 8 (bit)
Communications
stop bit
1/2
1/2
Communications
parity
//
None / even / odd
Highlighted characters indicate defaults.
FĂRelated parameters
Communications writing" (adjustment level) (p. 5Ć10)
Advanced Function Setting Level
Function
Setting
See