Omron fq2 User Manual

Controlling Operation and Outputting Data with TCP No-protocol Communications
FQ2 User’s Manual
361
Connecting through Ethernet
9
Start Continuous Measurements
This command starts continuous measurements.
If data output is not set, only continuous measurement is performed.
If data output is set, continuous measurement is performed and the results corresponding to the number of
measurements made are returned as response data.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Measurement result The measurement results corresponding to the number of measurements made are out-
put when data output is set.
The measurement result is not output when data output is not set.
Setting the Data To Output Automatically after Measurements: p. 352
ASME CR UR E / C
Delimiter
CR M/C
Delimiter
or
CR
CR
CR
OK
CR
Delimiter
Data returned for the number of
continuous measurements made.
Measure-
ment result
Measure-
ment result
Measure-
ment result
CR ER
Delimiter

Omron fq2 Specifications

General

Brand	Omron
Model	fq2
Category	Digital Camera
Language	English