Omron fq2 User Manual

Setting Conditions for Taking Images
FQ2 User’s Manual
59
3
Taking Images
3-2 Setting Conditions for Taking Images
You can set the conditions for taking images to use in inspections.
To enable accurate judgements, the following adjustments are made for the conditions for taking images and
the images themselves.
Taking Clear Images (Camera Setup)
Adjusting the Focus
Adjust the focus of the Lens.
Taking Bright Images of Dark Objects and Taking Clear Images of Moving Objects
Adjust the shutter speed and gain.
Adjusting the Colors of the Image (White Balance)
Adjust the white balance so that the colors match those of the actual measurement object.
Improving the Image Quality of Metallic and Other Shiny Surfaces (HDR)
Make adjustments for shiny objects or metallic surfaces.
For a Sensor with built-in lighting, attach a polarizing filter to cut specular reflections.
Adjusting the Images That Were Taken (Image Adjustment)
Filtering the Images (Filter Items)
Apply filters to adjust the images that were taken.
Compensating for Position Offset (Position Compensation Items)
Recognize measurement objects that are not in a consistent location and move them to the center of the image.
Adjusting the Timing of Taking Images (Trigger Setting)
Trigger Delay
Adjust the timing of taking an image with the Sensor.
p. 63
p. 60
p. 64
p. 65
p. 66
p. 69
p. 74

Omron fq2 Specifications

General

Brand	Omron
Model	fq2
Category	Digital Camera
Language	English