Omron fq2

External Reference Parameters
462
FQ2 User’s Manual
Edge Pitch
190 Judge-
ment
condi-
tions
Edge width upper limit Setting/Acqui-
sition
−99,999.9999 to
99,999.9999
99,999.9
999
--- Adjust judge-
ment
191 Edge width lower limit Setting/Acqui-
sition
−99,999.9999 to
99,999.9999
0
310 Logging
condi-
tions
Data logging switch for
entire unit
Setting/Acqui-
sition
0: Data logging OFF,
1: Data logging ON
1 --- ---
311 Data logging switch for
judgement
Setting/Acqui-
sition
0: Data logging OFF,
1: Data logging ON
1 --- ---
312
Data logging switch
for edge width
Setting/Acqui-
sition
0: Data logging OFF,
1: Data logging ON
1 --- ---
700 Display
settings
Edge width display Setting/Acqui-
sition
0: Display, 1: Do not display 0 --- ---
800 Wedge width display
pattern
Setting/Acqui-
sition
0: Absolute value, 1: Relative
value, 2: Percentage
0 --- ---
External
refer-
ence
number
Category Data name Setting/Acqui-
sition
Data range Default Expres-
sion text
string
Logged data/
Judgement
parameter
0Mea-
sure-
ment
result
Judgement Acquisition
only
−2: No judgement (not mea-
sured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed
error,
−14: Figure not registered error,
−15: Out of range error
−2 JG Logged data
5 Edge pitch Acquisition
only
0 to 999 0 N Logged data
6 Average pitch Acquisition
only
0 to 99,999.9999 0 P Logged data
7 Maximum pitch Acquisition
only
0 to 99,999.9999 0 PH Logged data
8 Minimum pitch Acquisition
only
0 to 99,999.9999 0 PL Logged data
9 Average width Acquisition
only
0 to 99,999.9999 0 W Logged data
10 Maximum pitch Acquisition
only
0 to 99,999.9999 0 WH Logged data
11 Minimum pitch Acquisition
only
0 to 99,999.9999 0 WL Logged data
103 Output
parame-
ter
Reflect Setting/Acqui-
sition
0: Yes, 1: No 0 --- ---
External
refer-
ence
number
Category Data name Setting/Acqui-
sition
Data range Default Expres-
sion text
string
Logged data/
Judgement
parameter