Omron fq2

Controlling Operation and Outputting Data with TCP No-protocol Communications
FQ2 User’s Manual
371
Connecting through Ethernet
9
Set Inspection Item Data
This command sets the parameters and measurement values of the specified inspection item.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Inspection item number Specifies the inspection item number. (0 to 31)
External reference data
number
Specifies the external reference data number. (0 to 9999)
12-2 External Reference Parameters: p. 430
Acquired value Returns the data for the specified inspection item.
12-2 External Reference Parameters: p. 430
IT DATA Setting CR EM
Inspection
item number
(2 digits max.)
Command
Space
(0x20)
Space
(0x20)
Space
(0x20)
Delimiter
Setting
Delimiter
External reference
data number
(4 digits max.)
External reference
data number
(4 digits max.)
Set value
Set value
Command
or
DI CR
Space
(0x20)
Space
(0x20)
Space
(0x20)
Inspection item
number
(2 digits max.)
CR OK
Delimiter
CR ER
Delimiter