Omron fq2 User Manual

Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
384
FQ2 User’s Manual
Changing the Scene Number: 280F 00301000
This command changes the scene number to use.
● Format
● Response Format
● End Codes
● Parameter Descriptions
MRC
(1 byte)
SRC
(1 byte)
Vision Sensor command code
(4 bytes)
Scene number (4 bytes)
28 0F 00301000 Scene number to change to (2
digits max.)
MRC
(1 byte)
SRC
(1 byte)
MRES
(1 byte)
SRES
(1 byte)
Vision Sensor command code
(4 bytes)
28 0F End code 00301000
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Scene number Specifies the scene number (0 to 31) to change to.

Omron fq2 Specifications

General

Brand	Omron
Model	fq2
Category	Digital Camera
Language	English