Omron MC4700 - Page 53

. . . . .
OMRON SCIENTIFIC TECHNOLOGIES INC.
Fremont CA USA
Tel: 1/888/510-4357 in USA and Canada
© OSTI 1209 PN99584-0050 Rev. E
Original Instructions
51
Relay version of metal chassis controller only: 100 - 230 VAC @ 30 VA
*Internal consumption of power by the controller is less than 10 watts (415mA
).
Light Source: GaAlAs Light Emitting Diode
, 850 nm
Cable Length: Up to 30 m betwee
n the controller and the transmitter and receiver assemblies. The
DIN system operates with shielded cables on the OSSD and AUX outputs with lengths up to 75 m.
Construction:
— Transmitter and receiver are polyester powder painted aluminum.
Tempe r at ure: 0 to 55° C (32 to 131° F)
Relative Humidity: 95% maximum, non-condensing
Enclosur
e Rating:
— Transmitter and receiver: IP65
— Controller: IP20 for DIN mount and IP65
for Metal Chassis
Approvals:
— CE, TUV, UL and CSA
Conformities::
— ESPE Type 4 (EN 61496-1 / -2)
— Category 4 / PL e (EN ISO 13849-1)
— SIL3 / SIL CL3 (IEC 61508 / EN 62061)
Safety Related Parameters:
— PFH = 1.2 E-08 1/h
— Proof Test Interval = 6.5 years
— MTTFd = 100 years
Indicator Lights:
— Receiver: Machine Run, Machine Stop, Interlock/Fault, Channel Select/Floating Blanking, Individual
Beam
— Controller: Machi
ne Run, Machine Stop, Interlock/Fault, Channel Select/Floating Blanking; plus two-
digit diagnostic display and bus status LED for DeviceNet option.
Specifications subject to change without notice.