Omron NS10-TV Series

Section 2 NS Series Functions 2-8 Common Functional Object Functions
2-100
NS Series Programming Manual
N
N
N
o
o
o
t
t
t
e
e
e
♦
A functional object will not flicker if an unsupported flicker method is specified in the property settings
for that object.
2-8-14 Write Settings (Extension Tab)
A confirmation message can be set to be displayed when data is written using buttons and other func-
tional objects that are manipulated. Any confirmation message can be set. The write settings are made
on the Write Tab Page of the Functional Object Properties Dialog Box. (For Multifunction Objects, make
the setting on the General Tab Page.)
Using Standard Messages
Select standard message on the Write Tab Page. The standard message shown below will be dis-
played.
N
N
N
o
o
o
t
t
t
e
e
e
♦
The message may protrude outside the screen when displayed on the PT, depending on the length
of the entered message. If the message goes outside the screen, edit the message and insert a
carriage return at an appropriate spot.