Section 2 NS Series Functions 2-2 NS Series Screen Types
2-11
NS Series Programming Manual
2-2-3 Screen Numbers
NS-series screens are categorized and controlled using screen numbers.
Screen numbers are used to specify the display screen when the PT is started or when switching the
displayed screen.
Except for the System Menu Screen for which specific functions have been set, up to 4,000 screens
can be set for NS-series PTs. Any number between 0 and 3,999 can be set for these screens.
In addition, up to 32 sheets can be registered for layered display on normal screens. Any number be-
tween 0 and 31 can be set for these sheets.
When PT screens are created using the CX-Designer, the screen number is specified and the objects
to be displayed are registered.
To Next Page
Loading...
Need help?
General
