Section 2 NS Series Functions 2-18 System Clock
2-409
NS Series Programming Manual
2-18-2 Time Objects
Time objects are functional objects used to display or set the time for the system clock.
The display section is a touch switch. A Setting Dialog Box (keypad) for changing the system time is
displayed when this touch switch is pressed.
Change the system time.
18.23.46
Changing Times During PT Operation
1. Press the time object.
2. A dialog box for entering the time such as shown in the above diagram will be displayed.
3. Enter the new time.
Regardless of the time display format, enter the time in hh (24-hour clock).mm.ss format. There is
no need to add zeros.)
4. Press the ENTER Button.
5. The time will be set.
Example: When setting the time to 4:36:4 PM, input 16.36.04.
When changing the time during PT operation, refer to the following table and set the time.
AM PM
Time 0 1 2 3 4 5 6 7 8 9 10 11 0 1 2 3 4 5 6 7 8 9 10 11
Input to the PT 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
To Next Page
Loading...
