Section 2 NS Series Functions 2-18 System Clock
2-410
NS Series Programming Manual
Settings for Functional Object Properties
This section describes the settings in the Functional Object Properties Dialog Box for time objects.
General: Sets the time display format.
Text: Sets the font and size for time display characters.
Background: Sets the background color for time display.
Frame: Sets the object frame display.
Flicker: Sets the flicker display. (See note.)
Write: Sets the contents of the write confirmation message when the time object is pressed. (See note.)
Password: Sets the password to be entered when the object is pressed. (See note.)
Control Flag: Sets enable/disable input and display/no display for objects. (See note.)
Size/Position: Sets the object size and position. (See note.)
Note: These tabs are displayed when
Display Extension Tabs Option is selected.
General Tab Page
Sets the time display format.
1
2
4
3
5
No. Setting Details
1
Object
Comment
Sets an explanatory comment for the pasted object.
(Up to 32 characters.)
2 Switch Sets the time display format for each label.
3 Display format Select the time display format from the list.
Refer to Date and Time Format in 2-8 Common Functional Object Functions for informa-
tion on the time display format.
4
Apply to All
Labels
Uses the date display method of the selected label for all labels.
Apply to All Labels cannot
be set in the following cases.
• When the Date & Time Display Format Check Box is selected on the Edit/Display Tab
Page of the Option Dialog Box accessed by selecting
Tools - Option.
• When there is only one label.
To Next Page
Loading...
