Section 2 NS Series Functions 2-11 Multifunction Objects
2-198
NS Series Programming Manual
Read Data from CSV File to NS
Reads the data from the specified record in the CSV file to the specified NS address.
1
2
3
4
No. Item Details
1 Record No.
Specifies the record number in the CSV file (0 to 999) to use in the control op-
eration.
The record number can be set indirectly through a communications address by
selecting the Indirect Option.
2 File Location Specifies either the NS or the Memory Card as the location of the CSV file.
The file location can be set indirectly by selecting the Indirect Option.
If the specified address is 0, the NS will be used.
If the specified address is 1, the Memory Card will be used.
3 Address Specifies the communications address for storing the CSV file data.
4 Record Label Specifies whether to include the record label when reading.
To Next Page
Loading...
