Section 2 NS Series Functions 2-11 Multifunction Objects
2-200
NS Series Programming Manual
Read Data from NS to PLC Data Block
Transfers one record of data from the specified addresses in the NS to the PLC Data Block address set
in each field.
1
2
No. Item Details
1 Address Specifies the PT memory address where the one record of data is stored.
2 Record Label
Selects whether or not the record label is included in the data stored at a speci-
fied communications address.
Write Data from PLC Data Block to NS
Reads the data from the PLC Data Block address set in each field to the specified NS address.
1
2
To Next Page
Loading...
