Section 2 NS Series Functions 2-11 Multifunction Objects
2-203
NS Series Programming Manual
Contents Control
Switches the displayed contents. Press the Object Control Button and select Contents Control from
the list that is displayed.
1
No. Item Details
Action Selects the method for switching contents.
The setting items depend on the selected method.
Switch to the
specified contents
No.
Switches to the specified contents number when the button is pressed.
Switch to the
indirect reference
contents No.
Reads the contents of a specified address as the contents number and
switches to that contents number.
Sets the contents of the communications address as a binary value.
Switch to the next
contents No.
Displays the data for the next contents number.
1
Switch to the pre-
vious contents
No.
Displays the data for the previous contents number.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Multifunction Object processing will be canceled in the following cases.
If the specified contents number does not exist.
If contents control is executed in a screen where contents switching has not been set, the op-
eration will be canceled and the next function will be executed.
To Next Page
Loading...
