Section 2 NS Series Functions 2-14 Alarms and Events
2-313
NS Series Programming Manual
Control Flag Tab Page (Extension Tab)
Control flags control the input and display of functional objects. Use control flags to enable display or
input when the contents of an address turn ON or OFF. Refer to Control Flags under 2-8 Common
Functional Object Functions for details.
Macro Tab Page (Extension Tab)
Macros can be specified for alarm/event display objects.
Refer to the CX-Designer’s NS-series Macro Reference for information on setting macros.
Size/Position Tab Page (Extension Tab)
Displays and sets the functional object size and position. Refer to Size/Position under 2-8 Common
Functional Object Functions for details.
To Next Page
Loading...
