Omron NS10-TV Series

Section 2 NS Series Functions 2-14 Alarms and Events
2-315
NS Series Programming Manual
The Ladder Monitor starts.
Select an alarm or event and
start the Ladder Monitor.
The communications address
for the selected alarm or event
will be searched for
automatically.
For details, refer to 2-14-4 Searching for Alarms and Events Using the Ladder Monitor.
For information on the Ladder Monitor, refer to the NS-series Ladder Monitor Operation Manual (Cat.
No. V082).
N
N
N
o
o
o
t
t
t
e
e
e
♦
This function can be used if the NS system is version 8.0 or higher and the Ladder Monitor is ver-
sion 3.0 or higher.