Omron NS10-TV Series

Section 1 Overview 1-3 Communicating with the Host
1-24
NS Series Programming Manual
Address Operation Classification
13
Short Intermittent Buzzer
(ON: Buzzer ON, OFF: Buzzer OFF)
14
Long Intermittent Buzzer
(ON: Buzzer ON, OFF: Buzzer OFF)
15 Notification/Control of Video
NS status notification
and control
16 Port A NT Link Priority Registration (for 1:N)
17 Port B NT Link Priority Registration (for 1:N)
NS status control
18 Ten Key Pad Display with Temporary Input NS status control
19
Input Disable (ON: Disabled, OFF: Enabled)
To clear input disable, touch the screen and enter the password for
the password level set under $SW13 in the dialog box that will be
displayed prompting password input.
NS status control
20 Contrast Adjustment (+10 levels) (NS5 only)
21 Contrast Adjustment (+1 level) (NS5 only)
22
Contrast Adjustment (−1 level) (NS5 only)
23
Contrast Adjustment (−10 levels) (NS5 only)
NS status control
24 Video Capture
NS status notification
and control
25 Start Printing/Capture Screen
26 Stop Printing
27 Test Pattern Printing
28 Printer head-cleaning (Ignored for PictBridge.)
29 Update Printer Status
NS status control
30 Printer Busy Status/Capture Busy Status NS status notification
31 Notification of Printer Error/Capture Screen Error NS status notification
32
Alarm/Event History Initialization
(Executed when ON.)
NS status notification
and control
33 Alarm/Event History Save
(Executed when ON.)
NS status notification
and control
34 Internal Holding Memory ($HB/$HW) Initialization
(Executed when ON.)
NS status notification
and control
35 Data Log Initialization
(Executed when ON.)
36 Data Log Save
(Executed when ON.)
37
Operation Log Initialization
(Executed when ON.)
38 Operation Log Save
(Executed when ON.)
NS status notification
and control
39
Functional Object Operation Log Execution
(ON: Execute, OFF: Not execute)
40
Screen Switch Operation Log Execution
(ON: Execute, OFF: Not execute)
41
Macro Execution Operation Log Execution
(ON: Execute, OFF: Not execute)
NS status control
42
Error Log Initialization
(Executed when ON.)
43
Error Log Save
(Executed when ON.)
NS status notification
and control
44 Reserved (Do not access.)
−