Section 2 NS Series Functions 2-19 Machine Navigator Function
2-414
NS Series Programming Manual
Switching Contents from Alarm/Event Objects
The settings shown in the following table are made.
Settings for switching contents Alarm/event settings
Link with alarm: ON
Contents number for no alarm: 0
No.
Displayed
contents num-
ber
Automatically
switch contents
when alarm oc-
curs
Contents
No.
Contents 1 1 OFF
0 (Not set.) (Not set.) 2 2 OFF
1
The battery
…
Battery.bmp … … …
2
The back-
light …
BackL.bmp
… … …
Display contents No. 1.
Display contents No. 2.
Select alarm using
alarm/event display
Select alarm No. 1.
Select alarm No. 2.
Select alarm using
alarm/event summary &
history
To Next Page
Loading...
