Omron Varispeed E7

6-118
 Displaying User-set Parameters Only
The A2 parameters (user-set parameters) and A1-01 (parameter access level) can be used to establish a param-
eter set that contains only the most important parameters.
Set the of the parameters to which A2-01 to A2-32 should refer to and then set A1-01 to 1. In Advanced Pro-
gramming Mode now only the parameters assigned to A2-01 to A2-32 are displayed and can be changed.
Related Parameters
Parameter
Number
Name
Setting
Range
Factory
Setting
Change
during
Operation
Access
Level
A2-01
to
A2-32
User-set parameters
b1-01
to
o3-02
–NoA