1-14
Additional Installation Precautions for the IP54 Inverters
• Ensure that the door locks are closed before carrying the Inverter. Always hold the case when carrying the
Inverter, do not carry it holding the door or the cable glands. If the door locks are open or the Inverter is
held by the door (or cable glands) when carrying the main body of the Inverter may fall, possibly resulting
injury.
• Pay attention not to damage the cable glands when lifting. Otherwise the equipment may be damaged by
ingress of water or dust.
Keeping the IP54 protection
• Mount the blind plugs attached for option and control entry if these terminals are not connected
• Pay attention not to damage the cable glands during the installation
To Next Page
Loading...
