100
Section 5 Entering Threshold Values
ZX-E
Operation Manual
Section 5
DETAILED SETTINGS
Automatic Teaching
When automatic teaching is executed, measurement is performed while the keys are
held down and the maximum and minimum measurements during that period are set
as the threshold values.
Automatic teaching is useful when you want to set threshold values by starting the
device and obtaining real measurements.
Hold, trigger mode, and scaling settings that have been made before teaching are reflected in the
teaching measurements.
Moving to T Mode
1. Set the mode switch to T.
2. Start the device.
The threshold switch can be set to either position. Both HIGH and LOW thresholds will be set,
regardless of the switch setting.
Minimum = LOW threshold value
Maximum = HIGH threshold valu
Sensor Head
Sensing
object
Maximum
Minimum
Operation
Z166-E1-02A.book Page 100 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
