Omron ZX-E - Basic Knowledge for Operation; Switching Modes

46
Section 3 Basic Knowledge for Operation
ZX-E
Operation Manual
Section 3
BASIC OPERATION
Basic Knowledge for Operation
Switching Modes
The ZX-E has three modes. Use the Mode Switch on the Amplifier Unit to switch
between modes. Switch to the desired mode before starting operation.
Function Transition Charts, p. 51
Mode Description
RUN Normal operation mode
T Mode for setting the threshold values
FUN Mode for setting measurement conditions
Z166-E1-02A.book Page 46 Friday, June 3, 2005 4:18 PM