74
Section 4 Measuring Thickness
ZX-E
Operation Manual
Section 4
MAIN APPLICATIONS AND SETTING METHODS
Measuring Thickness
This section describes how to measure thickness, using the thickness of a steel plate as an
example.
When making settings while still connected to an external device, set the Amplifier Unit’s judgement output
hold input to ON so that the output to the external device remains unchanged.
Adjust linearity before performing this operation.
Adjusting Linearity, p. 54
❚ Flow of Operation
Steel plat
Mounting to
Device
Adjusting Setting
Distances
Setting
Expressions
Preventing Mutual
Interference
Setting Tolerance
Judgement Values
(If required)
Z166-E1-02A.book Page 74 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
