123
ZX-E
Operation Manual
Section 6 Changing the Number of Display Digits
Section 6
AUXILIARY FUNCTIONS
Changing the Number of Display Digits
Select the number of digits for the main and sub-displays in RUN mode. The default setting is
5 digits. When 4 or less digits are set, the digits are disabled from the rightmost digit first.
Moving to FUN and SPCL
1. Set the mode switch to FUN.
2. Use the LEFT and RIGHT Keys to display
SPCL on the main display.
Moving to DIGIT
3. Press the UP or DOWN Key.
The sub-display will flash.
4. Use the UP and DOWN Keys to display DISP
or ALL.
5. Press the ENT Key.
6. Use the LEFT and RIGHT Keys to display
DIGIT on the main display.
Selecting Number of Digits
7. Press the UP or DOWN Key.
The sub-display will flash.
8. Use the UP and DOWN Keys to select the
number of display digits.
9. Press the ENT Key to confirm the setting.
Z166-E1-02A.book Page 123 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
