47
ZX-E
Operation Manual
Section 3 Basic Knowledge for Operation
Section 3
BASIC OPERATION
Reading Displays
The data displayed on the main and sub-displays depends on the mode currently
selected. When the power is first turned ON after shipment, RUN mode data is dis-
played.
Function Transition Charts, p. 51
■ Alphabet Display Format
The alphabet appears on the main and sub-displays as shown in the following table.
Mode Main Display Sub-display
RUN Displays the measured value
(the value after measurement
conditions have been reflected.)
For example, when the hold func-
tion is set, the held value will be
displayed.
Changes between displaying the present value (actual mea-
sured value), threshold value, output value, and resolution in
order when the Control Keys are pressed.
Threshold Value Display
Displays either the HIGH or LOW threshold value, depending
on the position of the threshold switch.
The monitor focus setting determines whether the value is
output as voltage or current.
Output Settings (Monitor Focus), p. 103
T Displays the measured value
(the value after the measurement
conditions have been reflected).
For example, when the hold func-
tion is set, the held value will be
displayed.
Displays the threshold value for the threshold being set.
Displays either the HIGH or LOW threshold value, depending
on the position of the threshold switch.
FUN Displays the function names in
order when the Control Keys are
pressed.
Displays the setting for the function displayed on the main dis-
play.
Main display
Sub-display
Z166-E1-02A.book Page 47 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
