67
ZX-E
Operation Manual
Section 4 Measuring Height
Section 4
MAIN APPLICATIONS AND SETTING METHODS
Measuring Height
This section describes how to measure the height of an object, using a rivet as an example.
When making settings while still connected to an external device, set the Amplifier Unit’s judgement output
hold input to ON so that the output to the external device remains unchanged.
Adjust linearity before performing measurement.
Adjusting Linearity, p. 54
❚ Flow of Operation
Place an actual sensing object in position. Have a reference sample ready beforehand.
Rivet: Metal
Plate: Resin
Mounting to
Device
Adjusting
Measurement
Distances
Measuring
Reference
Samples
Setting
Measurement
Timing
Setting Tolerance
Judgement Values
Z166-E1-02A.book Page 67 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
