Omron ZX-E - Adjusting Display Brightness (ECO Display)

126
Section 6 Adjusting Display Brightness (ECO Display)
ZX-E
Operation Manual
Section 6
AUXILIARY FUNCTIONS
Adjusting Display Brightness (ECO Display)
When the ECO display function is used, the digital displays are not lit, reducing current
consumption.
Moving to FUN and SPCL
1. Set the mode switch to FUN.
2. Use the LEFT and RIGHT Keys to display
SPCL on the main display.
Moving to ECO
3. Press the UP or DOWN Key.
The sub-display will flash.
4. Use the UP and DOWN Keys to display DISP
or ALL.
5. Press the ENT Key.
6. Use the LEFT and RIGHT Keys to display
ECO on the main display.
Selecting Whether or Not to Use ECO Display
7. Press the UP or DOWN Key.
The sub-display will flash.
8. Select either OFF or ON.
OFF: Normal display (default)
ON: ECO display
9. Press the ENT Key to confirm the selection.
The display setting will be registered.
When ON is selected, the display will become dark.
Z166-E1-02A.book Page 126 Friday, June 3, 2005 4:18 PM