48
Section 3 Basic Knowledge for Operation
ZX-E
Operation Manual
Section 3
BASIC OPERATION
Key Operations
Use the Control Keys to change the display and set measurement conditions.
The mode currently selected determines the key functions.
Switching Modes, p. 46
Control Key
Key
Function
RUN Mode T Mode FUN Mode
Cursor
Keys
LEFT Key
RIGHT Key
Changes sub-display
content.
Used when selecting
numeral digits.
Function changes depend-
ing on setting.
• Switches function display.
• Selects numeral digit.
• Stops setting.
UP Key Performs timing input. Used when changing
numerals.
Function changes depend-
ing on setting.
• Switches between
selections.
• Changes numerals.
DOWN Key Resets input.
ENT Key Performs zero reset. Function changes depend-
ing on operation.
• Confirms threshold value.
• Executes teaching.
Confirms the set condition or
value.
Z166-E1-02A.book Page 48 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
