140
Appendices
Specifications and Dimensions
ZX-E
Operation Manual
APPENDICES
Specifications and Dimensions
ZX-EDA11 and ZX-EDA41 Amplifier Units
Vinyl-insulated round cable,
5.1 dia., 9 conductors
(cross-sectional area of
conductor: 0.09 mm
2
,
Insulator diameter: 0.7 mm)
Standard length: 0.1 m
Vinyl-insulated round cable,
5.2 dia., 10 conductors
(cross-sectional area of conductor:
0.09 mm
2
,
Insulator diameter: 0.7 mm)
Standard length: 2 m
(Unit: mm)
ZX-EDA11 ZX-EDA41
Measurement
period
150
µs
Possible settings for
number of samples
to average
(See note 1.)
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, or 4096
Linear output
(See note 2.)
Current output: 4 to 20 mA/F.S., Max. load resistance: 300
Ω
Voltage output: ±4 V (± 5 V, 1 to 5 V, See note 3.), Output impedance: 100 Ω
Judgement outputs
(3 outputs:
HIGH/PASS/LOW)
NPN open-collector outputs,
30 VDC, 50 mA max.
Residual voltage: 1.2 V max.
PNP open-collector outputs,
30 VDC, 50 mA max.
Residual voltage: 2 V max.
Judgement output
hold input
ON: Short-circuited with 0-V terminal or 1.5 V
or less
OFF: Open (leakage current: 0.1 mA max.)
ON: Supply voltage short-circuited or within
supply voltage 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Zero reset input
Timing input
Reset input
Z166-E1-02A.book Page 140 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
