62
Section 4 Detecting Bottom Deadpoint
ZX-E
Operation Manual
Section 4
MAIN APPLICATIONS AND SETTING METHODS
Detecting Bottom Deadpoint
This section describes, as an example, how to detect the bottom deadpoint of a press
machine.
When making settings while still connected to an external device, set the Amplifier Unit’s judgement output
hold input to ON so that the output to the external device remains unchanged.
Adjust linearity before executing this operation.
Adjusting Linearity, p. 54
❚ Flow of Operation
Mounting Sensor
to Press
Adjusting
Detection Position
Setting Bottom
Deadpoint Position
Setting
Measurement
Timing
Setting Tolerance
Judgement Values
Z166-E1-02A.book Page 62 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
