118
Section 6 Measuring with Multiple Amplifier Units
ZX-E
Operation Manual
Section 6
AUXILIARY FUNCTIONS
■ Finding Thicknesses
The expression THICK is used. Prepare a sensing object of known thickness before-
hand (standard sensing object). The settings are all performed on the CH2 Amplifier
Unit.
Moving to FUN and CALC
1. Place the standard sensing object in positions.
2. Set the mode switch to FUN on the CH2
Amplifier Unit.
3. Use the LEFT and RIGHT Keys to display
CALC on the main display.
Selecting Expressions
4. Press the UP or DOWN Key.
The sub-display will flash.
5. Use the UP and DOWN Keys to display
THICK on the sub-display.
6. Press the ENT Key to confirm the selection.
Thickness
Calculating Unit
Z166-E1-02A.book Page 118 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
