17
ZX-E
Operation Manual
Section 1 ZX-E Features
Section 1
FEATURES
Useful Notification Function
■ Warming Up Display
The display shows the warming-up status when the power is turned ON. This enables
measurements to be started when the status has stabilized after warming up has been
completed.
See page 41.
Many, Simple Functions
■ Measurement Ready at Power ON
The Smart Sensor can be used simply by installing and wiring it. Simply turn ON the
power and it’s ready to operate.
The measurement distance is displayed on the Amplifier Unit.
Warming up
in progress
Warming up
completed
Time lapsed after power up (min.)
Fluctuation of measured value
Below specified
resolution
The sub-display flashes
W-UP
during warm-up.
Z166-E1-02A.book Page 17 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
