72
Section 4 Measuring Eccentricity and Vibration
ZX-E
Operation Manual
Section 4
MAIN APPLICATIONS AND SETTING METHODS
Mounting to Device
Mount the Sensor Head to the inspection device.
Refer to the following diagram and prepare a mounting jig.
Installing Sensor Heads, p. 30
Adjusting Measurement Distances
Adjust the position of the Sensor Head so that the distance (H) between the Sensor
Head and the sensing object is about half the measurement distance, as shown in the
diagram. Refer to the Amplifier Unit display while adjusting the Sensor Head position.
Measurement distance, p. 143
Mounting jig
resin or metal
Set screw
Z166-E1-02A.book Page 72 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
